자동적인 작은 애완 동물 순수한 광수 예비 성형품 병 부는 기계
전자동 블로우 성형기는 모든 형태의 PET 플라스틱 용기 및 병 생산에 적합합니다. 탄산 병, 광천수, 살충제 병 기름 병 화장품, 넓은 입 병 및 핫 필 병 등을 생산하는 데 널리 사용됩니다.
제품 소개
자동적인 작은 애완 동물 순수한 광수 예비 성형품 병 부는 기계

Linear Automatic PET Blow Molding Machine is an economical model self-developed by LiDLi technical team, with features economic, fast, convenient. It can make different kinds of PET packages for water, edible oil, juice, wine, cosmetics, etc. It can make max. 2Litre bottle.
1. Upgrade to Servo Motor Drive:
a.Preform 공급 시스템: servo motor partitioning effectively solves the problem of wear and deformation.
b.Preform 전송 시스템: PET preform horizontal movements are driven by Servo Motor. Make preforms 4pcs as one unit, overall simplified stepping motion, achieve high-speed positioning and smooth motion. to complete one step cycle, the Servo Motor drive gear rotates only one-third of a turn. Speed of preform moving is 2 times of Cylinder Driven way.
2. 서랍 디자인으로 고정된 금형, 금형 교체는 30분 안에{1}}쉽게 완료할 수 있습니다.
3. Efficiency Constant Temperature Oven:
a.Use the most advanced high-frequency Infrared Lamp, increase heating efficiency 30 percent -50 percent .
b.Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c.Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-2845ºC).
d.Preform self-rotation System, ensure every side of every preform is heated evenly, which ensures the quality of the blown bottle. (thickness up to 4.5mm)
e.Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation
중공 성형기 구성
| 아니요. | 설명 | 브랜드 원산지 |
| 1 | PLC | 미쓰비시(일본) |
| 2 | 조작반 | Schneider (France) |
| 3 | 실린더 | 대만 |
| 4 | 서보 모터 | XINJIE (CHINA) |
| 감속기 | XINJIE (France) | |
| 5 | 판막 | 대만 |
| 6 | 광전 스위치 | 오므론(일본) |
| 7 | AC 접촉기, 열 릴레이 | 슈나이더(프랑스) |
중공 성형기 사양
| 아이템 | 단위 | 모델 | |
| Mold Spec. | 클램핑 스트로크 | mm | 125 |
| 스트레칭 스트로크 | mm | 240 | |
| 하단 스트로크 | mm | 30 | |
| 캐비티 피치 | mm | 114.3 | |
| 충치의 수 | 충치 | 6 | |
| 컨테이너 사양 | 최대 볼륨, 클릭률 | L | 2 |
| 목 직경 | mm | 1838 | |
| 최대 직경, ctr. | mm | 114.3 | |
| 최대 높이, 클릭률 | mm | 320 | |
| 전원 사양 | 총 전력 | kW | 130 |
| 난방 전력 | kW | 120 | |
| 공기 압축기 사양 | 부는 압력 | kg/cm2 | 28-35 |
| 고압{0}} 공기 소비 | m3/분 | 3.6 | |
| 물 냉각 사양. | 작동 압력 | kg/cm2 | 6 이상 |
| 온도 범위 | ºC | 520 | |
| 냉장 용량 | kcal/시간 | 15000 | |
| 유량 | m3/h | 4.1 | |
| 수냉식 사양 | 작동 압력 | kg/cm2 | 4 이상 |
| 온도 범위 | ºC | 30 이하 | |
| 유량 | m3/h | 4.8 | |
| 주요 기계 사양 | 사이즈(LWH) | mm | 520017902110 |
| 무게 | 킬로그램 | 7500 | |
| SN. | 설명 | 사양 | 수량 | 단위 | 메모 |
| 1 | 육각 렌치 | φ14 | 1 | 조각 | |
| 2 | 솔리드 렌치 | 1 | 조각 | ||
| 3 | Monkey Wrench | Φ 50 | 1 | 조각 | |
| 4 | Cross Screwdriver | 1 | 조각 | ||
| 5 | 일자 드라이버 | 1 | 조각 | ||
| 6 | 일자 드라이버 | 3MM | 2 | 조각 | |
| 7 | 콤비네이션 렌치 | 8 | 조각 | ||
| 8 | 도구 키트 | 1 | 조각 | ||
| 9 | 퀵 커넥터 (조정 불가) | Φ6-M5 | 10 | 조각 | |
| φ10-1/2 | 2 | 조각 | |||
| Φ8-1/4 | 6 | 조각 | |||
| Φ10-1/4 | 6 | 조각 | |||
| φ16-1/2 | 6 | 조각 | |||
| 10 | T{0}}접합 | φ6 | 6 | 조각 | |
| φ8 | 2 | 조각 | |||
| φ8 | 4 | 조각 | |||
| 11 | 퀵 커넥터 ( 똑바로 ) | Φ8-Φ6 | 6 | 조각 | |
| 13 | Elbow Connector (Adjustable ) | Φ8-1/8 | 10 | 조각 | |
| Φ8-1/4 | 4 | 조각 | |||
| (Φ6-M5) | 6 | 조각 | |||
| 14 | Elbow Connector (Non-Adjustable ) | Φ10-3/8 | 2 | 조각 | |
| Φ10-1/4 | 6 | 조각 | |||
| Φ16-1/2 | 4 | 조각 | |||
| 15 | PU 파이프 | φ62 meter | 1 | 조각 | |
| φ86 meter | 1 | 조각 | |||
| φ162 meter | 1 | 조각 | |||
| φ104 meter | 1 | 조각 | |||
| 16 | 씰링 부품 | 4 | 조각 | ||
| 17 | 열 램프 | 20 | 조각 | ||
| 18 | (실린더) 마그네틱 스위치 | 3 | 조각 | ||
| 19 | 광전자 스위치 | 4 | 조각 | ||
| 20 | 접근 스위치 | 4 | 조각 | ||
| 21 | 서보 근접 스위치 | 4 | 조각 | ||
| 22 | Supercharge screw (with O ring) | 4 | 조각 | ||
| 23 | 고압{0}}파이프(1인치 3미터/고압 조인트 2개 포함) | 2 | 조각 | ||
| 24 | 과급 밀봉 부품 | 2 | 조각 | ||
| 25 | 신축봉의 완충고무 | 2 | 조각 | ||
| 26 | 신축봉의 완충고무 | 2 | 조각 | ||
| 27 | 레볼루션 링크 | 6 | 세트 | ||
| 28 | 수행 홀더 | 6 | 조각 | ||
| 29 | Φ8 Clamp spring (Outside) | 100 | 조각 | ||
| 30 | 체인 핀 | 12 | 조각 | ||
| 31 | 프리폼 홀더의 클램프 스프링(내부) | 12 | 조각 | ||
| 32 | 그리퍼 | 4 | 쌍 | ||
| 33 | Machine feet Φ165 | 8 | 조각 | ||
| 34 | 도구 | 1 | 세트 | ||
아론 왕 영업 관리자킹 머신 |
Phone/whatsapp/wechat: plus 86-15262329005 이메일:aaron@king{0}}machine.com 웹사이트: http://www.king{0}}machine.com/ https://www.liquidpackingmahines.com/ ADD:NO.22 East Seven Road Donglai Town, Zhangjiagang City, Jiangsu Province, China |
인기 탭: 자동 작은 애완 동물 순수 미네랄 워터 프리폼 병 부는 기계, 중국 제조 업체, 공급 업체, 공장, 가격, 판매
문의 보내기
당신은 또한 좋아할지도 모릅니다







